bearing surface的例句大全

The so-called bearing chamfer , that is, the horizontal and vertical bearing surface of the junction.

所谓轴承的倒角, 就是说轴承的横面与竖面的交接处.

When a surrounding groove is arranged on the bearing , abrasion is alleviated on the bearing surface.

轴承上的卸荷槽有防止或减轻轴承表面磨损的作用.

Enough surface oil to bearing surface of ring.

精选铁基粉末,烧结形成多孔结构,含油适度,跑道部位充分润滑.

To ensure bearing work reliably, must be set up to deliver lubricant to the bearing surface.

为保证曲轴轴承工作可靠, 曲轴上必须设置可靠的润滑油道,将润滑油送到轴承磨擦表面上去.

The journal rubs against the bearing surface.

轴颈在轴承面上摩擦.

Spacer ring provides bearing surface and prevents deformation of the gasket.

隔离环提供支撑面,防止垫圈的变形.

Finally, we need to at whether the imports of bearing surface of muddy traces of oil.

最后我们需要看一下进口轴承的表面是否有浑浊的油迹.

Tolerances, gaps, surfaces, installation chamfers , length of bearing surface, length of stroke, frequency, speed, etc.

公差, 间隙, 表面, 安装倒角, 表面承受的长度, 行程的长度, 频率, 速度等等.

The production of an image by applying an ink bearing surface to paper.

加油墨于承印纸的表面以产生影象的一种技术.

Study on surface roughening and wearing of the oil-film bearing sleeve

油膜轴承锥套表面拉毛磨损的特征分析

Glazed pottery or glassware bearing a decorative surface network of fine cracks.

裂瓷一种表面饰有细碎裂纹图案的上釉陶器或玻璃制品.

After bearing coating gradually cools, forming a shiny surface layer.

压光后的涂料层逐渐冷却后, 形成一光亮的表面层.

After bearing coating gradually cooling of a shiny surface layer.

压光后的涂料层逐渐冷却后形成一光亮的表面层.

Adopting the straight-line bearing and asynchronism electrical machineries of conical surface braking, operation is steady.

采用直线轴承及锥面制动三相异步电机, 运作平稳.

Analysis on lateral load-bearing capacity of conductor and surface casing for deepwater drilling A Method of Safe Mud Density Window and Casing Program Determination with Credibility

深水钻井导管和表层套管横向承载能力分析含可信度的钻井液密度窗口及套管层次和下深确定方法

"D" type bearings with the lubrication mechanism of polymer, make the bearing surface, and return to the pump inlet side, in order to ensure the effective axis.

“D”型轴承结合了强制润滑机理，使聚合物经轴承表面，并返回到泵的进口侧，以确保旋转轴的有效润滑。

Place in the earth and cover with soil. lining a surface or bearing with babbitt metal.

放于地面并用土覆盖。在上面覆盖一层合金。

The connecting wire is directly fixed on a surface of a bearing object, thereby reducing reflecting loss of incident sunlight, simplifying mounting process and reducing mounting case.

再用套管连杆、人字支架和连接线将若干个单位电池板组合集成，并由连接线直接固定在承载物体表面。

Our study reveals that the ore-bearing porphyry exposed at surface is only the apophyses and intense erosion did not take place thus the main porphyry are still at depth and it is potential for discovering big porphyry deposit to depth.

研究表明，地表和浅部出露的含矿斑岩体只是其岩枝，矿床剥蚀程度低，主斑岩体尚未出露，深部找矿潜力巨大。

Smear surface of bearing with Jubricating Oil tO improve the lubricity when casing . 2.

在轴承表面涂一点润滑油,以增加压套时的润滑油性.